These are the print files for the targets.

You need two of these in the example, and they should be:
- PLA
- 2.4mm wall thickness or more
- 30% fill

The files are
- Target Bracket 12mm,  this is for a 12mm thick deck and is RECOMMMENDED
- Target Bracket 9mm,  this is for a 9mm thick deck and is NOT RECOMMMENDED, but is here in case it is useful
- Targets_Top, this is a screw on top for the targets to make them pretty and to hold the target tiles in place
- Target Tiles numbers, These are four tiles with numbers on them.  We printed the first 2 layers in a bright colout then stopped the print and changed to black.  We suggest you do similar else you wont see the numbers.
- Target Tile.  not needed, but there just in case you want blank tiles.
